Service Manual

4. Secure the crankcase to the cylinder with four (4)
screws.
Torque the screws to 50-60 in•lb (5.6-6.8 N•m).
5. Install a new crankcase cover gasket, the
crankcase cover, and attaching screws.
Torque the screws to 55-65 in•lb (6.2-7.3 N•m).
Install Spark Plug
1. Make sure the spark plug gap is set to
0.018-0.023 inch (0.045 to 0.058 mm) using a
wire feeler gauge.
2. Install the spark plug into cylinder and torque to
100-120 in•lb (11.2-13.5 N•m).
ENGINE (cont.)
2.6071.067
2.6071.069
2.6071.068
4
REASSEMBLY
4- 6