Service Manual

2.6071.046
3.6071.045
2.6071.043
2. Inspect the baffle inside muffler for carbon
build-up. Clean baffle by scraping carbon as
required. Use a piece of wire to clear
obstructions from the small holes in baffle.
3. Inspect the muffler mounting holes for elongation.
Replace the muffler if the holes are elongated.
Muffler Reassembly
1. Install a new gasket and the exhaust exit tube.
Secure the tube with two (2) screws.
Torque the screws to 15-25 in•lb (1.7-2.8 N•m).
Remove Clutch
Standard N28 Engines
1. Remove the four (4) screws securing the clutch
cover to starter housing. Remove the clutch
cover.
MAJOR COMPONENTS (cont.)
3
DISASSEMBLY, INSPECTION, & REPAIR
3 - 19