Service Manual

Install Primer Bulb
1. Install primer bulb into air filter base.
Install Carburetor, Choke, and Connect
Fuel Lines
Use the following procedures to install carburetor,
fuel lines, and choke:
NOTE: This unit has two fuel lines to the fuel tank.
The clear line provides normal fuel flow. The blue
line provides a return line for excess fuel flow during
the primer operation. The primer return line is
connected to the longer fitting of the primer bulb.
1. Connect the fuel lines to the carburetor and
primer bulb.
2. Install the carburetor gasket, carburetor, air filter
base, choke lever, wavy washers, flat washers,
and carburetor mounting screws.
Torque the screws to 23-27 in•lb (2.6-3.0 N•m).
MAJOR COMPONENTS (cont.)
2.6078.109
2.6078.108
3.6078.110
To Carburetor
Return Line
4
REASSEMBLY
4 - 13