Service Manual

Install Muffler

1. Install a new muffler gasket, muffler, and

muffler mounting screws.

For Trimmers And Cultivators— Make sure the

extended edge of the cylinder gasket is between

the muffler body and muffler heat shield.

For Model 200/210 Blower— Make sure the

shorter, straight edge of muffler gasket is to the

top (towards spark plug hole) of cylinder and the

angled corner is towards the ignition module.

2 . For Units With Serial Number Prior to 809000000—

Torque screws to 56 in•lb (6.3 N•m).

For Units With Serial Number 809000000 and

Greater— Torque screws to 80-90 in•lb

(9.0-10.1 N•m).

INSTALL MAJOR COMPONENTS

(cont.)

2.6089.124

2.6089.054

3.6089.123

REASSEMBLY

4-16