Service Manual

Model 200/210 Blower

1. Install a new carburetor mount/reed plate

gasket, carburetor mount/reed plate

assembly, and attaching screw.

2. Torque the screw to 60-65 in•lb (6.8-7.3 N•m).

Install Carburetor, Choke, And Connect Fuel Lines

Two basic air filter and choke styles are used on trim-

mer and cultivator engines: A “round” air filter with a

choke “knob”, or a “square” air filter with choke “lever”.

A “square” air filter cover is also used on blowers and

blower/vacs.

Use the following procedures to install carburetor, fuel

lines, and choke:

NOTE: Units equipped with a primer will have two

fuel lines to the fuel tank. The clear line provides nor-

mal fuel flow. The blue line provides a return line for

excess fuel flow during the primer operation. The

primer return line is connected to the longer fitting of

the primer bulb.

INSTALL MAJOR COMPONENTS

(cont.)

3.6078.110

2.6081.047

Return Line

2.6090.038

REASSEMBLY

4-18