Service Manual

For Model 200/210 Blower— Position the longer skirt
of piston so it is on the same side as the
exhaust port of cylinder.
3. Position a new cylinder gasket on cylinder as
follows:
For Trimmers And Cultivators— Position the
longer, straight edge of gasket so it is on the
same side as the exhaust port of cylinder.
For Models 280, 300BV, 310, And 310BV
Blowers and Blower/Vacs— Position the longer,
straight edge of gasket so it faces away from the
exhaust port of cylinder.
ENGINE REASSEMBLY (cont.)
2.6089.108
2.6089.110
2.6089.109
Long Skirt
Exhaust Port
4
REASSEMBLY
4-6