Operator's Manual

g015662
Figure14
1.Spool
2.Hole
Note:Removeanyoldstringremainingonthe
spool.
3.Thespoolacceptsupto4.5m(15ft)of
string.Useonly1.65mm(0.065inch)diameter
monolamentstring.
Note:Donotuseanyothergaugeortypeof
string,asthiscoulddamagethetrimmer.
4.Insertthestringintotheanchorholeintheupper
partofthespool(Figure14).Windthestring
ontothespoolinthedirectionshownbythe
arrowsonthespool.
5.Placethestringintheslotontheupperspool
ange,leavingabout152mm6inch(6inches)
extendedbeyondtheslot.
Note:Donotoverll.Afterwindingthestring,
thereshouldbeatleast6mm1/4inch(1/4inch)
betweenthewoundstringandtheoutsideedge
ofthespool.
6.Replacethespoolandthespoolretainer.Refer
toReplacingtheSpool(page13)earlierinthis
manual.
Service
Shouldthisitemneedservice,taketheproductto
yourAuthorizedServiceDealer.
PreparingtheBatteryPack
forRecycling
Important:Uponremoval,covertheterminalsof
thebatterypackwithheavy-dutyadhesivetape.
Donotattempttodestroyordisassemblethe
batterypackorremoveanyofitscomponents.
Recycleorproperlydisposeoflithium-ionbattery
packsatabatteryrecyclingfacility.
Formoreinformationonrecyclinglithium-ion
batterypacksandtolocatethebattery
recyclingfacilityclosesttoyou,visit
www.Call2Recycle.org(USandCanadaonly).
IfyouarelocatedoutsideoftheUSand
Canada,pleasecontactyourauthorizedT oro
distributor.
14