Service Manual

ELECTRIC TRIMMER/WEEDER SERVICE MANUAL
Table of Contents – Page 3 of 4
SERVICE INSTRUCTIONS
5.0 CHECK FOR LINE/GRASS STOPPING HEAD ROTATION (FIG. 5.0)
5.01 CLEAN HEAD AND TEST (FIG. 5.01)
5.1 INSPECT UPPER TO LOWER HARNESS CONNECTION (FIG. 5.1)
5.11 SECURE UPPER TO LOWER HARNESS CONNECTION (FIG. 5.11)
5.2 CHECK BATTERY CONNECTIONS (FIG. 5.2)
5.21 SECURE BATTERY CONNECTIONS
5.3 TEST OUTPUT VOLTAGE OF BATTERY CHARGER (FIG. 5.3)
5.31 REPLACE BATTERY CHARGER
5.4 CHECK CHARGER OUTPUT AT BATTERY CONNECTIONS (FIG. 5.4)
5.41 REPLACE UPPER WIRING HARNESS
5.5 CHARGE BATTERY FOR 48 HOURS AND TEST (FIG. 5.5)
5.51 REPLACE BATTERY AND CHARGE FOR 48 HOURS
5.6 INSPECT MOTOR
5.61 REPLACE MOTOR (FIG. 5.61)
5.7 SPIN MOTOR BY HAND
5.71 CHECK DRUM (FIG. 5.71)
5.72 REPLACE DRUM SERIAL NOS. 800001-9115104
5.73 BAD BEARING - REPLACE MOTOR OR TRIMMER
5.8 CHECK HARNESS CONNECTIONS AT MOTOR
5.81 SECURE MOTOR CONNECTIONS (FIG. 5.81)
5.9 TEST LOWER HARNESS (FIG. 5.9)
5.91 REPLACE LOWER HARNESS
6.0 TEST SWITCH CONNECTIONS
6.01 SECURE LOOSE CONNECTIONS
6.1 TEST SWITCH (FIGS. 6.1A, 6.1B)
6.11 REPLACE SWITCH
6.2 TEST UPPER HARNESS (FIGS. 6.2A, 6.2B)
6.21 REPLACE UPPER HARNESS
6.3 REPLACE MOTOR
PARTS CATALOG
TORO TRIMMER 900 HANDLE ASSEMBLY
PARTS
TORO TRIMMER 900 MOTOR AND HOUSING ASSEMBLY
PARTS
TORO TRIMMER 900 HANDLE ASSEMBLY
PARTS
TORO TRIMMER 900 MOTOR AND HOUSING ASSEMBLY
PARTS
TORO TRIMMER 1100 HANDLE ASSEMBLY
PARTS