Operator's Manual

•Removetheboltsandnutssecuringthehitchtube
toframebrackets(Figure4).
•Securethetubetotheframewiththeboltsand
angenuts.
4.Connecttheblowerclevishitchtothetowvehiclehitch
withthehitchpinandclevis(Figure5).
Figure5
1.Hitchpin
3.Clevis
2.Towvehiclehitch
4
AssemblingtheHandheld
Remote
Partsneededforthisprocedure:
1Handheldremote
4AAAbatteries
6
Screws,small
Procedure
1.Removetherubberbandssecuringtheremotehalves
together,andremovethebackcover.
2.Plugeachbatteryintoaterminalcradleobserving
properpolarity(Figure6).
Note:Ifthebatteriesareimproperlyinstalled,theunit
willnotbedamaged,butitwillfailtooperate.The
cradleisembossedwithpolaritymarkingsforeach
terminal.
Figure6
1.Screw4.Steelgasket
2.Cover
5.Batteries
3.Seal
6.Handheldremote
3.Ensurethatthesteelgasketandrubbersealareseated
inthechannelintheremoteandsetthebackcover
inplace(Figure6).
4.Securethecoverwith6screws(Figure6)andtorque
themto1.5to1.7N-m(13to15in-lb).
9