Installation Instructions

g030823
Figure134
1.Flangelocknut(5/16inch)4.Backofthemachine
2.Nozzlemount
5.Hex-headbolt(stainless
steel—5/16x3/4inch)
3.Sprayernozzle
4.Torquetheangelocknutto1978to2542N∙cm
(175to225in-lb).
5.Repeatsteps1through4fortheothersprayer
nozzlesforthespraysection.
6.Repeatsteps1through5totheouter-spray
sectionattheothersideofthemachine.
24
Connectingthe
Pressure-SenseTube
fortheDashGauge
NoPartsRequired
ConnectingthePressure-Sense
TubefortheDashGauge
MachineswithouttheOptionalHandWandKit
ortheOptionalElectricHoseReelKit
1.Aligntheendofthepressure-sensetube
(plastic)forthepressuregaugeinthedashwith
thelockingcollarforthetubecoupler(Figure
135).
g281444
Figure135
1.Pressure-sensetube
(dash-pressuregauge)
2.Lockingcollar(tube
coupler)
2.Insertthesensetubeintothelockingcollaruntil
thetubeisfullyseated(Figure135).
InstallingthePressureSense-Tube
MachineswiththeOptionalHandWandKitor
theOptionalElectricHoseReelKit
1.Assemblethe90°ttingoftheshutoffvalvefor
theoptionalspraywandkitortheelectrichose
reelkitontotheangeofnozzlevalve10with
theangeclampandgasket,andtightenthe
clampbyhand(Figure136).
g281603
Figure136
1.Gasket3.Flange(nozzlevalve10)
2.90°tting(shutoffvalve)
4.Flangeclamp
66