Installation Instructions

4.Connectthe4-pinconnectoroftheactuatorfor
theratevalveintothe4-socketconnectorof
the89cm(35inch)kitsprayer-harnessbranch
labeledRATEVALVE(Figure89).
g199114
Figure89
1.4-socketconnector—89
cm(35inch)kit
sprayer-harness
branch—RATEVALVE)
2.4-pin
connector(actuator—rate
valve)
15
AssemblingtheFlow-Meter
Manifold
Partsneededforthisprocedure:
1
Straighthosebarb(1x2inches)
3
Hoseclamp(3/4to1-1/2inches)
1
Hose(1x5-3/4inches)
1
Manifold
1
Hose(1x16inches)
AssemblingtheManifold
1.Assemblehose(1x5-3/4inches)ontothe
straighthosebarb(1x2inches)withahose
clamp(3/4to1-1/2inches),andtightenthe
clampbyhand(Figure90).
g281439
Figure90
1.Straighthosebarb(1x2
inches)
4.Manifold
2.Hoseclamp(3/4to1-1/2
inches)
5.Hose(1x16inches)
3.Hose(1x5-3/4inches)
2.Assembletheotherendofthehose(1x5-3/4
inches)ontothebarbedttingofthemanifold
withahoseclampasshowninFigure90,and
tightenthehoseclampbyhand.
3.Assemblethehose(1x16inches)ontotheother
barbedttingofthemanifoldwithahoseclamp,
andtightentheclampbyhand(Figure90).
AssemblingtheManifoldtothe
FlowMeter
1.Assemblethestraighthosebarb(1x2inches)
totheangeoftheowmeterwiththegasket38
mm(1-1/2inches)andangeclamp51mm(2
inches)thatyouremovedinstep6ofRemoving
theSectionValvesfromtheManifoldMount
(page36).
45