Installation Instructions

g313835
Figure119
1.90°ttings2.O-rings9.2/1.8mm
(0.364/0.070inch)
4.Installa2newO-ring9.2/1.8mm(0.364/0.070
inch)intothegrooveofthe90°ttings(Figure
119).
5.Assemblethestraightttingofthehose6x1397
mm(1/4x55inches)ontothe90°ttinginthe
retractportofthesteeringcylinder,andtighten
bothhosettings(Figure118).
6.Routetheendofthehose6x1270mm(1/4x
50inches)withthestraightttingthroughthe
grommetintheoorplate(Figure120).
g302037
Figure120
1.Hose6x1270mm(1/4
x50inches);-6(straight)
and-6(90°)ttings
3.90°tting(extend
port—steeringcylinder)
2.PortCLtting(EHI
steeringvalve)
7.Assemblethe90°ttingofthehose6x1270
mm(1/4x50inches)ontotheportCLttingof
theEHIsteeringvalve(Figure120).
8.Assemblethestraightttingofthehose6x1270
mm(1/4x50inches)ontothe90°ttinginthe
extendportofthesteeringcylinder,andtighten
bothhosettings(Figure120).
AssemblingtheTank-ReturnHose
andHydraulic-PumpHosetothe
EHISteeringValve
1.Identifythetank-returnhose10x2921mm(3/8
x115inches)with2ttings(90°).
2.Routetheendofthetank-returnhose10x2921
mm(3/8x115inches)throughthegrommetin
theoorplate(Figure121).
44