Installation Instructions

10
InstallingtheSteering
PositionSensor
Partsneededforthisprocedure:
1
Steeringpositionsensor(magnetictargetandsensor)
1
Jamnut(10mm)
1
Sensorbracket
1
Sensoralignmenttool
2
Pan-headscrew(#4x3/4inch)
2
Locknut(#4)
2
Flange-headcapscrew(1/4x3/4inch)
2
Locknut(1/4inch)
InstallingtheSensorBracket
1.Removethecapscrewfromtheendofthe
kingpin(Figure51).
Note:Discardthecapscrew.
g299593
Figure51
1.Capscrew
3.Alignmenttool
2.Kingpin
2.Threadthealignmenttoolintothetopoftheking
pin(Figure51).
3.Alignthesensorbracketoverthealignmenttool
andtheslotsintheangeofthespindle(Figure
52).
g313637
Figure52
1.Locknut(1/4inch)4.Flange(spindle)
2.Sensorbracket
5.Flange-headcapscrews
(1/4x3/4inch)
3.Alignmenttool
4.Looselyassemblethebrackettotheange
(Figure52)with2ange-headcapscrews(1/4x
3/4inch)and2locknuts(1/4inch).
5.Positionthebrackettothebottomoftheslots
intheangeofthespindle,andtightenthe
ange-headcapscrewsandlocknuts(Figure
52).
6.Removethealignmenttool(Figure53).
20