Service Manual

Multi Pro 5800 Page 8 − 11 GeoLink Spray System

X25 and X30 Control Console Screens

Operator control of the system is handled through either

a X25 (8.5 in. diagonal) or X30 (12 in. diagonal) touch

screen console mounted to the vehicle dash panel. The

spray system is configured and spray application is

monitored through the X25 or X30 console.

Operation Screen

NOTE: Based on the console type and the software ver-

sion, some differences may exist between your machine

and the information provided here.

A brief explanation of each of the operation screen icons

and the sub−menus and screens they expose follows in

the order they appear in Figure 5.

1. About menu icon

2. Guidance menu icon

3. GPS menu icon

4. Job information menu icon

5. Automatic section control menu icon

6. Spray controller menu icon

7. Inventory manager menu icon

8. Setup screen icon

9. View controls menu

10. Help menu icon

11. Job assistant icon

12. Record job details menu icon

13. Receiver (compass) calibration

menu icon

14. Sprayer icon

15. Virtual master switch icon

16. Virtual dashboard

Figure 5