Service Manual

Multi Pro 5800Page 6 − 14Electrical System
Spray Areas
Use the spray area screens to view the area and the
amount of product sprayed since the screens were
cleared (Fig. 14). See the machine Operators Manual or
Software Guide for additional information.
NOTE: Depending on the spray system installed or op-
eration mode, all indicators and icons may not appear.
See the individual spray system chapters in this manual
for specific information.
Total Area Screen
The total area screen displays the total area and total
amount of product sprayed since last reset. The total
area screen is accessed from the operator information
screen by pressing any button 1−4 to expose the menu
bar then press button 2.
Press any button 1−4 to expose the menu bar then press
button 2. From the menu bar, press button 2 to access
the spray area screen−total area or press button 3 to ac-
cess the spray area screen−sub area.
NOTE: Resetting the total area will also reset all of the
sub areas.
Press and hold button 4 to reset the total area.
Press button 3 to display the sub area screens.
Press button 1
to return to the operator information
screen, or button 5
to hide the menu bar.
Sub−Area Screen
The sub−area screen displays the area and amount of
product sprayed in the any of twenty (20) sub−areas
since last reset. The sub−area screen is accessed from
the operator information screen by pressing any button
1−4 to expose the menu bar then press button 3.
Press button 3 to select the next sub area, or button 4
to display the previous sub area.
Press and hold button 4 to reset the sub area currently
displayed.
Press button 2 to display the total area screen.
Press button 1
to return to the operator information
screen, or button 5
to hide the menu bar.
1
2
3
4
5
12
13
6
Figure 14
TOTAL AREA SCREEN
SUB AREA SCREEN
1. Button 1
2. Button 2
3. Button 3
4. Button 4
5. Button 5
6. Menu bar
7. Total area icon (pattern)
8. Total area applied
9. Total volume applied
10. Sub−area icon (pattern)
11. Sub−area number
12. Sub−area area applied
13. Sub−area volume applied
1
2
3
4
5
8
9
6
11
7
10