Service Manual

Multi Pro 5800−G Page 4 − 7 Kubota Gasoline Engine
3. Install fuel pump/level sender if previously removed
from tank. Tighten fuel pump/level sender cap from 13
to 65 in−lbs (1 to 7 N−m).
4. Connect fuel hose to top of fuel tank.
A. Push supply hose barb fitting onto fuel pump/lev-
el sender until an audible “Click” is heard.
B. Press barb fitting lock down to lock fitting in place
(Fig. 4).
5. Connect machine wire harness to fuel pump/level
sender (2 connectors)
6. Install fuel tank cover and tighten cover screws from
10 to 12 in−lbs (1 N−m).
7. Fill fuel tank. Start engine and check fuel line con-
nections for leaks.