Operator's Manual

22
Familiarize yourself with the controls and
recommended operating procedures before
operating the MULTI PRO
®
5600.
THROTTLE CONTROL: (FIG. 26) Move control
forward, toward "FAST", to increase engine
speed, rearward, toward "SLOW", to decrease
engine speed. Set throttle to slow when starting.
MANUAL CHOKE: (FIG. 26) Pull OUT when
starting cold engine, gradually push IN after
successfully starting engine.
FIG. 26
1. Throttle Control 2. Manual Choke
VEHICLE CONTROLS
TRACTION PEDAL: (FIG. 25) Controls forward
and reverse operation. Depress top of pedal to
move forward and bottom of pedal to move
backward. Ground speed depends on how far
pedal is depressed. For maximum ground speed,
fully depress pedal while throttle is in FAST.
To stop, reduce foot pressure on traction pedal
and allow it to return to center position.
EMERGENCY/PARKING BRAKE PEDAL:
(FIG. 25) Functions as a parking brake and an
emergency brake in situations demanding an
immediate stop.
BRAKE LOCK: (FIG. 25) The small pedal to the
left side of the brake pedal actuates the parking
brake lock. To engage parking brake, fully
depress brake pedal and depress brake lock
which locks brake pedal. To release parking
brake, fully depress brake pedal to release brake
lock.
REMOTE BOOM ON/OFF SWITCH: (FIG. 25)
Clicking on the Remote Boom ON/OFF Switch
on the floor board will allow the individual Boom
Switches to operate. All Booms can be switched
On or Off with Remote Master Switch.
1. Traction Pedal 3. Brake Lock
2. Brake Pedal 4. Remote Master Switch
FIG. 25

2053
2056
2
4
3
1