Operator's Manual

14
PUMP ENGAGEMENT LEVER: Engages and
disengages centrifugal pump belt drive.
PUMP ENGAGEMENT RELEASE LEVER:
Releases the Pump Engagement Lever to allow
pump to be engaged.
AGITATOR VALVE HANDLE: Opens and closes
the Agitator Valve to activate, adjust or stop the
agitation of the spray solution in the Tank.
SUCTION VALVE HANDLE: Opens and closes
the Suction Line Valve. Close during maintenance
to the Suction Line Strainer or Centrifugal Pump.
IMPORTANT! The Pump will be damaged if it
is activated with the Suction Line Valve closed,
or before the tank contains enough liquid to
flood the pump.
CONTROLS
41441 CENTRIFUGAL PUMP
FIG. 5
1. Pump Engagement 4. Suction Valve Handle
Lever (open)
2. Pump Engagement 5. Bleed Valve
Release Lever 6. Optional Spray Gun
3. Agitator Valve Handle Valve Handle (closed)
(open)
RATCHET VALVE HANDLE: Opens and closes
the Ratchet Valve, starting or stopping flow to
Booms.
PRESSURE ADJUST VALVE HANDLE: Controls
spray pressure. Turn clockwise to decrease
pressure and counterclockwise to increase
pressure.
PRESSURE GAUGE: Shows spray pressure when
Ratchet Valve is open. Shows deadhead pressure
when the Ratchet Valve is closed.
FIG. 6
1. Ratchet Valve Handle 3. Pressure Adjust Valve
2. Pressure Gauge Handle
1
1
3
2
5
4
6
3
2
LEFT BOOM SHUTOFF VALVE HANDLE: Starts
or stops flow to left Boom.
RIGHT BOOM SHUTOFF VALVE HANDLE: Starts
or stops flow to right Boom.
FIG. 7
1. Left Boom Shutoff 2. Right Boom Shutoff
Valve (open) Valve (open)
1
2