Operator's Manual

11
ENGINE OPERATING INSTRUCTIONS
FIG. 2
1. Choke Control 3. Throttle Control
2. Stop Switch 4. Starter Handle
STARTING THE ENGINE:
1. Set the Engine Stop Switch to ON.
2. For a Cold Engine: Place the throttle control
to the FAST
positions. Move the choke
control to the CHOKE position. Gradually
return the choke control to the RUN
position
after the engine starts and warms up. See FIG. 2.
For a Warm Engine: (normal operating
temperatures) Place the throttle control to the
fast
positions. Move the Choke Control to
the RUN position.
3. Pull the Starter Handle with a smooth, steady
motion. Pull the handle straight out to avoid excess
rope wear.
BEFORE STARTING ENGINE TO BEGIN THE
DAYS SPRAYER APPLICATION:
1. Check the engine crankcase oil.
2. Check the Air Cleaner.
3. Check cooling air intake areas.
4. Check the fuel tank.
3
4
2
1