Operator's Manual

g189584
g189585
Figure63
1.Flange-headbolts(5/16x
7/8inch)
3.Washers(5/16inch)
2.Undercarriageshroud
4.Frontofthemachine
2.Removethe4angelocknuts(5/16inch)from
theboltsandcarriageboltthatsecurethe
mountingtabsoftheundercarriageshroud
totheengine-mountbracketsofthemachine
(Figure64).
Note:Donotremovetheboltsfrom
themachine.Retaintheangelocknuts
forinstallationinstep3ofInstallingthe
UndercarriageShroud(page51).
g189583
Figure64
1.Enginemount
4.Flangelocknuts(5/16
inch)
2.Bolt—shownforclarity;do
notremove
5.Frontofthemachine
3.Mountingtabs
(undercarriageshroud)
3.Movethemountingtabsoffofthebolts
thatsecuretheundercarriageshroudtothe
engine-mountbrackets.
4.Removetheundercarriageshroudfromthe
machine(Figure63andFigure64).
InstallingtheUndercarriage
Shroud
1.Aligntheundercarriageshroudtothebottom
chassisofthemachine;refertoFigure64in
RemovingtheUndercarriageShroud(page50).
2.Movethemountingtabsoftheundercarriage
shroudovertheboltsandcarriageboltatthe
engine-mountbracketsofthemachine;refer
toFigure64inRemovingtheUndercarriage
Shroud(page50).
3.Assembletheundercarriageshroudtothe
engine-mountbracketsandbolts(Figure
64)withthe4angelocknuts(5/16inch)
thatyouremovedinstep2ofRemovingthe
UndercarriageShroud(page50).
4.Aligntheholesintherearpartofthe
undercarriageshroudwiththeholesinthe
chassis;refertoFigure63inRemovingthe
UndercarriageShroud(page50).
5.Assembletherearpartoftheundercarriage
shroudtothechassis(Figure63)withthe
5ange-headbolts(5/16x7/8inch)and5
washers(5/16inch)thatyouremovedinstep1
ofRemovingtheUndercarriageShroud(page
50).
6.Torquethenutsandboltsto1129to1582N∙cm
(100to140in-lb).
51