Service Manual

Multi Pro 5800−DPage 3 − 12Kubota Diesel Engine
11
11
12
13
14
15
26
24
18
19
20
1
2
3
4
4
5
6
6
7
8
9
10
21
22
27
28
29
30
31
31
32
33
16
23
25
17
17
Figure 7
1. Radiator
2. Foam seal (4)
3. Foam seal
4. Foam seal (2)
5. Foam seal
6. Hose clamp (4)
7. Upper radiator hose
8. Lower radiator hose
9. Lower fan shroud
10. Upper fan shroud
11. Flat washer (8)
12. Lock washer (4)
13. Cap screw (4)
14. Cap screw (2)
15. Flange nut (2)
16. Iso−mount (2)
17. Pop rivet (4)
18. Heat baffle − RH
19. Heat baffle − LH
20. Flange nut (2)
21. Fan shroud and oil cooler
22. Cap screw (4)
23. Cap screw (2)
24. Lock washer (6)
25. Flat washer (6)
26. Bracket (2)
27. Flange nut (2)
28. Cap screw (2)
29. Overflow bottle bracket
30. Hose (vent)
31. Hose clamp (3)
32. Overflow bottle
33. Hose (radiator)
FRONT
RIGHT
9. Remove four (4) cap screws (Fig. 7 item 13), lock
washers and flat washers that secure fan shroud as-
sembly to radiator.
10.Remove two (2) cap screws (Fig. 7 item 14), flat
washers and flange nuts to separate the fan shroud
halves and carefully remove the upper fan shroud from
the machine.
11. Remove six (6) cap screws (Fig. 7 items 22 and 23),
lock washers and flat washers that secure front radiator
shroud and oil cooler (Fig. 7 item 21) to radiator.
12.Remove two (2) flange nuts (Fig. 7 item 20) that se-
cure the iso−mounts on the bottom of the radiator to the
machine frame.