Service Manual

Multi Pro 5800 Page 8 − 59 GeoLink Spray System
1. Service mode state
field—SPOOL CALIBRA−
TION ARMED
2. START CALIBRA−
TION icon
3. Service mode state
field—SPOOL CALIBRA−
TION IN PROGRESS
4. Wheel movement status
5. Service mode state
field—SPOOL PARAM−
ETERS READY TO
UPDATE
Figure 71
17.At the bottom of the spool calibration screen, click the
ACCEPT AND SAVE icon (Fig. 72).
1. ACCEPT AND SAVE icon
Figure 72
18.On the WAS CALIBRATION screen, click the GOTO
WAS CALIBRATION MODE icon (Fig. 73).
1. GOTO WAS CALI−
BRATION MODE icon
2. System Navigator tab,
AUTO CALIBRATION
directory, and WAS
CALIBRATION icon
Figure 73
19.Fully turn the steering wheel to the left and stop.
20.Click the WAS CALIBRATION icon (Fig. 73).
21.Click the CAPTURE L icon (Fig. 74).
NOTE: The sensor value changes as you turn the steer-
ing wheel.
1. Sensor value 2. CAPTURE L icon
Figure 74
22.Fully turn the steering wheel to the right and stop.
23.Click the CAPTURE R icon (Fig. 75).
NOTE: The sensor value changes as you turn the steer-
ing wheel.