Operator's Manual

1
InstallingtheAnti-siphonFill
Receptacle
Partsneededforthisprocedure:
1
90degreetting
1
Quickcoupler
1Hoseadapter
1Fillreceptaclebracket
1
Flange-headbolt,5/16x3/4inch
1Anti-siphonhose
Procedure
1.Placethellreceptaclebracketoverthethreaded
holeinthetankandsecureitwithaange-headbolt
(5/16x3/4inch)(
Figure3).
Figure3
1.Fillreceptaclebracket
5.Quickcoupler
2.Threadedholeinthetank6.Hoseadapter
3.Flangebolt,5/16x3/4inch
7.Anti-siphonhose
4.90degreeelbowtting
2.Placethethreadedendofthe90degreeelbowtting
throughthebracketandthreadthequickcoupleronto
it,securingittothebracket(Figure3).
Note:Installthettingwiththeopenendpointing
towardthelargeopeninginthebracketandtowardthe
tankopeningsothewaterwillarcintothetankwhen
youllit.
3.Installthehoseadapterintothequickcoupler
(Figure3).
4.Locktheadapterintoplacebyswingingthelevers
towardtheadapterandthensecurethemwiththe
hairpincotters(Figure3).
5.Installtheanti-siphonhosethroughthelargeopening
onthebracketandontothebarbedendofthe90
degreeelbowtting(Figure3).
Important:Donotlengthenthehosetoallow
contactwiththetankuids.
2
InstallingtheSprayPro
Monitor
Partsneededforthisprocedure:
1
SprayProMonitor
1
SprayProDecal
1Bracket
2
Flange-headbolt,3/4inch
2
Flangenut,1/4inch
2Knob
2Washer
2
Carriagebolt
Procedure
1.InstalltheSprayProDecaltothemonitor(Figure4).
Figure4
1.Spraypromonitor3.Decal,Lowerhalf
2.Decal,Upperhalf
Note:Besuretoorientthedecalasshownin
Figure20.
2.Installthemonitorbracketonthedash(Figure5)using
2ange-headbolts(1/4x3/4inch)and2angenuts
(1/4inch).
15