Operator's Manual

Figure 34

1. Front jacking points

T he jac king point at the rear of the spra yer is on

the rear frame suppor t, betw een the angle w elds

( Figure 35 ).

Figure 35

1. Rear jacking points

Lubrication

Greasing the Sprayer

Lubricate all bearings and bushings after ev er y

100 hours or once a year , whic hev er occurs ﬁrst.

Grease T ype: No . 2 General Pur pose Lithium

Base Grease

1. Wipe the g rease ﬁtting clean so that foreign

matter cannot be forced into the bearing or

bushing .

2. Pump g rease into the bearing or bushing .

3. Wipe off ex cess g rease .

T he g rease ﬁttings positions are illustrated b y

the follo wing: Figure 36 through Figure 42 .

Figure 36

At the wheels, three on each side

1. Grease point

Figure 37

Steering rods

1. Grease point