Operator's Manual

Agitation Control Valve

T his v alv e is located on the right side of the tank

( Figure 19 ). T ur n the knob on the v alv e to the

9 o’cloc k position to tur n on the tank agitation

and to the 3 o’cloc k position to tur n off the tank

agitation.

Figure 19

1. Agitation control valve

2. Pressure gauge

Note: F or agitation to w ork, the pump m ust

be on and the engine m ust be r unning abo v e an

idle . If y ou stop the spra yer and need agitation on,

place the rang e selector in the Neutral position, set

the parking brak e , press the accelerator pedal to

the ﬂoor , tur n the pump On and tur n the neutral

engine speed loc k On.

Pressure Gauge

T he pressure g aug e is located to the right of the

tank ( Figure 19 ). T his g aug e sho ws the pressure

of the ﬂuid in the system in psi and kP a. Use the

g aug e to adjust the b y-pass v alv es whenev er y ou

c hang e nozzles .

Anti-siphon Fill Receptacle

T o the front of the tank co v er is a hose rece ptacle

with a threaded ﬁtting, a 90 deg ree barbed ﬁtting,

and a shor t hose whic h y ou can direct to w ard

the tank opening . T his rece ptacle allo ws y ou to

connect a w ater hose to it and ﬁll the tank with

w ater without contaminating the hose with the

c hemicals in the tank.

Important: Do not lengthen the hose to

allo w contact with the tank ﬂuids.