Service Manual

Starting Problems (continued)
Problem Possible Causes
Engine cranks, but does not start.
Circuit wiring to engine magneto is grounded (see
Chapter 9 – Electrical Diagrams).
Circuit wiring to carburetor solenoid is loose, corroded,
or damaged (see Chapter 9 – Electrical Diagrams).
Engine or fuel system is malfunctioning (see Chapter
3 – Kohler Gasoline Engine).
Engine may be too cold.
Engine cranks (but should not) with the range selector
lever out of the neutral position.
Neutral interlock switch wiring is faulty (see Chapter 9
– Electrical Diagrams).
Ignition switch is faulty.
Neutral interlock switch is out of adjustment or faulty.
General Run Problems
Problem Possible Causes
Battery does not charge. Wiring to the charging circuit components is loose,
corroded, or damaged (see Chapter 9 – Electrical
Diagrams).
Battery is dead.
Engine kills during operation.
Circuit wiring to engine magneto is damaged (see
Chapter 9 – Electrical Diagrams).
Circuit wiring to carburetor solenoid is loose, corroded,
or damaged (see Chapter 9 – Electrical Diagrams).
Engine or fuel system is malfunctioning (see Chapter
3 – Kohler Gasoline Engine).
Alternator is faulty.
Ignition switch is faulty.
Electrical
System
Multi Pro 1200/1250
Page 5 – 5
Electrical System