Service Manual
HYDROSTATIC DRIVE SYSTEM
6-28 Fixed Deck Mid-Size Service Manual
6
Fig 806 PICT-6858a
2. Position the wheel motor into the frame (Fig. 806).
Fig 805 PICT-6859
1. Transfer the fi ttings and all markings to the replace-
ment wheel motor. Torque fi ttings to 85-95 ft-lbs.
(115-129 Nm) (Fig. 805).
Installation
Fig 808 PICT-6853
4. Uncap the hoses and fi ttings and connect both
hydraulic hoses to the wheel motor. The markings
on the hose fi ttings and pump indicate which hose
connects to which fi tting. Torque the hose fi ttings to
34-38 ft-lbs. (46-52 Nm) (Fig. 808).
Fig 807 PICT-6855
3. Install 4 bolts securing the wheel motor to the motor
mount (Fig. 807).