Operator's Manual
Figure11
1.CarrierFrame4.Spacers
2.HairpinCotter5.Frontheight-of-cutpost
3.Backheight-of-cutpost
AdjustingtheAnti-Scalp
Rollers
Theanti-scalprollersneedtobeadjustedintheproper
holelocationforeachheight-of-cutposition.There
needstobe3/8inch(10mm)minimumclearance
abovetheground.
Note:Iftheanti-scalprollersareadjustedtoolowit
cancauseexcesswearoftherollers.
1.Afteradjustingheight-of-cut,checktheanti-scalp
rollerssothatthereisaminimumof3/8inch(10
mm)clearanceabovetheground(Figure12,or
Figure13).
2.Ifadjustmentisneeded,removethebolt,washers
andnut(Figure12,orFigure13).
3.Selectaholepositionsotheanti-scalprollersare
aminimumof3/8inch(10mm)offtheground
(Figure12orFigure13).
4.Installtheboltandnut(Figure12orFigure13).
Figure12
1.Mowerdeck
4.Anti-ScalpRollers
2.Bolt5.Nut
3.Spacer
Figure13
1.Mowerdeck4.Bushing
2.Bolt
5.Anti-ScalpRollers
3.Spacer
6.Nut
5.Incertainmowingconditionsandterrain,a
mismatchofcuttingheightmaybeseen.Adjusting
theoutsideanti-scalprollerstotheminimumsetting
of3/8inch(10mm)willhelppreventthemower
deckcuttingtoolowontheoutsideandminimize
themismatch.
AdjustingtheFlowBafe
Themowerdischargeowcanbeadjustedfordifferent
typesofmowingconditions.Positionthecamlockand
bafetogivethebestqualityofcut.
19