Operator's Manual

ControlsSystem
Maintenance
Adjustingthe
Motion-control-handle
Positions
AdjustingtheRightSideMotion-control
Lever
Ifthemotion-controlleversdonotalignhorizontally,adjust
therightsidemotion-controllever.
Note:Adjustthehorizontalalignmentbeforethe
front-to-backalignment.
1.DisengagethePTO,movetherightsidemotion-control
levertotheneutralposition,andsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Pushtherightmotion-controlleverdownoutofthe
neutral-lockposition(
Figure53).
4.Checkifitalignshorizontallywiththeleft
motion-controllever(Figure53).
Figure53
1.Leftmotion-controllever3.Checkthehorizontal
alignmenthere
2.Rightmotion-controllever
intheneutral-locked
position
4.Rightmotion-controllever
5.Toadjusttherightmotion-controlleverhorizontally,
thecamneedstobeadjusted.
6.Removethecoverunderthecontrolpanel.
7.Loosenthenutandboltholdingthecam(
Figure54).
8.Adjustthecamuntilitalignswiththeleft
motion-controlleverandtightenthenutandboltfor
thecam.
Figure54
1.Cam
4.Turnbuckle
2.Nutandbolt
5.Switchscrews
3.Wingnut
9.Afterthecamisadjusted,theleverswitchneedstobe
checked.
10.Checkthegapbetweenthecontrolleverandtheswitch
asshowninFigure55.Thegapneedstobebetween
1.6to2.4mm(1/16to3/32inch).
11.Ifneeded,loosenthescrewsholdingtheswitchand
adjusttheswitch.
12.Tightenthescrewsandinstallthecoverunderthe
controlpanel.
40