Service Manual

LINKAGE

4-80 Floating Deck Mid-Size Service Manual

Fig 0603 ﬁ g. 3 G006080

Handle Assembly Removal (T-2)

26. Plug the two harness wires into the harness con-

nector as shown (Fig. 0601):

1. Turn the engine off and remove the key from the

ignition.

2. Disconnect the negative battery terminal from the

battery.

28. Connect the negative battery terminal to the battery.

29. Check the Adjustment of the Control Bar. Refer to

“Control Bar Adjustment” on page 4-132.

Fig 0601 PICT-1742

27. Plug the harness connector into the OPC switch

(Fig. 0602).

Fig 0602 PICT-1744