Operator's Manual

CheckingtheEngineDeckHeight
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Adjustthetirepressureinthereartirestospecications;
refertoDriveSystemMaintenance(page28).
4.MeasureenginedeckheightatlocationA(Figure62).
Figure62
1.Backviewofmachine
3.Tires
2.Topofenginedeck4.Sameheightatlocations
AandB
5.MeasureenginedeckheightatlocationB(Figure62).
6.IftheheightatlocationAandBarenotthesame,
changetirepressureslightlytomakethemthesame.
CheckingtheCarrierFrame
Front-to-RearPitch
Thecarrierframemusthaveapitchbetween1/8inch(3mm)
to3/8inch(9mm)overthelengthof24inches(61cm)on
thecarrierframe(Figure63).
1.Measureout24inches(61cm)onthecarrierframe
(Figure63).
Figure63
1.CarrierFrame
4.HeightatlocationsAand
B
2.1/4-3/8inch(6-10mm)
pitchover24inch(61cm)
length
5.CasterWheel
3.24inches(61cm)6.Casterspacers
2.MeasurecarrierframeheightatlocationA(Figure63).
3.MeasurecarrierframeheightatlocationB(
Figure63).
4.TheheightatlocationAmustbea1/4-3/8inch(6mm
-10mm)lowerthanlocationB(Figure63).
5.Ifthecarrierframeisnotcorrect,movecasterspacers
tomakeita1/4-3/8inch(6-10mm)pitch(Figure63).
Movespacersfromtoporbottomtomakethecorrect
pitch.
6.Thetirepressuremayalsobeadjustedslightlytomake
a1/4inch(6mm)pitch.
CheckingtheCarrierFrame
Side-to-SideHeight
Thecarrierframeneedstobeparallelside-to-sidefromthe
ground.
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Adjustthetirepressureinthereartirestospecications;
referto
DriveSystemMaintenance(page28).
4.MeasurecarrierframeheightatlocationA(Figure64).
5.MeasurecarrierframeheightatlocationB(Figure64).
6.Ifthecarrierframeheightisnotthesamemovespacers
fromtoporbottomofcasterwheel,tomakeitlevel.
Thetirepressuremayalsobeadjustedslightlytomake
itlevel.
39