Operator's Manual

Figure64
1.Carrierframe
4.HeightatlocationsAand
B
2.6-10mm(1/4-3/8inch)
pitchover61cm(24inch)
length
5.Casterwheel
3.61cm(24inches)6.Casterspacers
2.MeasurecarrierframeheightatlocationA(Figure64).
3.MeasurecarrierframeheightatlocationB(Figure64).
4.TheheightatlocationAmustbea6mm-10mm
(1/4-3/8inch)lowerthanlocationB(Figure64).
5.Ifthecarrierframeisnotcorrect,movecasterspacers
tomakeita6mm-10mm(1/4-3/8inch))pitch
(Figure64).
Note:Movethespacersfromthetoporbottomto
makethecorrectpitch.
6.Thetirepressuremayalsobeadjustedslightlytomake
a6mm(1/4inch)pitch.
CheckingtheCarrierFrame
Side-to-SideHeight
Thecarrierframeneedstobeparallelside-to-sidefromthe
ground.
1.DisengagethePTOandsettheparkingbrake.
2.Stoptheengine,removethekey,andwaitforallmoving
partstostopbeforeleavingtheoperatingposition.
3.Adjustthetirepressureinthereartirestospecications;
refertoDriveSystemMaintenance(page30).
4.MeasurecarrierframeheightatlocationA(Figure65).
5.MeasurecarrierframeheightatlocationB(Figure65).
6.Ifthecarrierframeheightisnotthesamemovespacers
fromtoporbottomofcasterwheel,tomakeitlevel.
Thetirepressuremayalsobeadjustedslightlytomake
itlevel.
Figure65
1.Casterwheel4.Sameheightatlocations
AandB
2.Carrierframe5.Casterspacers
3.Frontheight-of-cutpins
CheckingtheMowerDeck
Front-to-RearPitch
1.Adjustthetirepressureinthereartirestospecications;
refertoDriveSystemMaintenance(page30).
2.Position1bladefront-to-rear.MeasureatAandB
locationsfromalevelsurfacetothecuttingedgeofthe
bladetips(Figure66orFigure67).
Note:For36inchmowerdecksuseFigure67.
3.Themowerbladeshouldbea6mm(1/4inch)lower
infrontatAthanintherearatB.
4.Rotatebladesandrepeatforotherblades.
5.Ifitisnotcorrect,proceedtoChangingtheDeck
Front-to-RearPitch.
Figure66
48inchMowerDeckshown
1.MeasurebladeatpointsA
andB
2.Measurefromalevel
surface
42