Service Manual

9-13Power Max Service Manual

WHEEL CLUTCH

TRACTION DRIVE SYSTEM

14. Position the hole for the hairpin cotter between the 2

washers and push the hairpin cotter into place (Fig.

162). Repeat for the other side.

16. Before installing the wheel clutch assembly, lightly

coat the 11-tooth gear of the wheel clutch with anti-

seize (Fig. 164).

Fig 162 MVC-061X.jpg

Fig 164 MVC-035X.jpg

15. Lightly coat the 44-tooth sprocket with anti-seize

(Fig. 163).

Fig 163 MVC-2205X.jpg

Fig 161 MVC-059X.jpg

13. Insert the woodruff key onto the axle shaft evenly

and make sure the 44-tooth gear can ride over the

shaft freely (Fig. 161).

A. Hairpin Cotter