Operator's Manual

Problem Corrective ActionPossible Causes

6. The auger/impeller drive belt is

loose or is off the pulley.

6. Install and/or adjust the

auger/impeller drive belt.

7. The auger/impeller drive belt is

worn or broken.

7. Replace the auger/impeller

drive belt.

Snowthrower does not properly

clear the snow off the surface

1. The tire pressure is low. 1. Check the pressure in the tires

and adjust it if necessary.

2. The skids and/or the scraper is

not properly adjusted.

2. Adjust the skids and the

scraper.