Operator's Manual

2.InstallingtheDischarge
Chute
3
Screws
1
Chuteassembly
Procedure
Installthedischargechuteasshown(Figure6).
Figure6
1.Dischargechute
2.Screw(3)
Note:Foreasierinstallation,useasmallratchetwrench
totightenthescrews.
Important:Donotovertightenthescrews;
otherwiseyoumaydamagethedischargechuteand
preventitfromturningfreely.
3.FillingtheEnginewithOil
Procedure
Yoursnowthrowerdoesnotcomewithoilintheengine,
butitdoescomewithabottleofoil.
Important:Beforestartingtheengine,llthe
enginewithoil.
Note:Thebottleofoilmaycontainmorethanis
required.Donotoverlltheengine.
Maxll:21oz.(0.62l),type:automotivedetergentoil
withanAPIserviceclassicationofSJ,SL,orhigher.
•Fortemperaturesabove32°F(0°C),useSAE30.
•Fortemperaturesbetween0°Fand32°F(–18°Cand
0°C),useSAE5W30orSAE10.
•Fortemperaturesbelow0°F(–18°C),useSAE
0W30.
1.Movethesnowthrowertoalevelsurface.
2.Cleanaroundtheoilllcap(Figure7).
Figure7
1.Oilllcap
3.Unscrewtheoilllcapandremoveit.
4.Withthesnowthrowerintheoperatingposition,
carefullypouroilintothecrankcaseuntilthepoint
ofoverow .
5.Screwtheoilllcapintotheoilllholeandtighten
itsecurely.
4.AdjustingtheControlCable
Procedure
RefertoAdjustingtheControlCableinMaintenance.
6