Service Manual

Auger Installation (cont'd) 5. Support the auger so that the end of the auger
shaft is centered in the hole in the side plate.
Slide the side plate
and auger bearing assembly Tighten the four cap screws and nylon lock nuts. 3.
onto the auger shaft and secure with the top five
cap screws and lock nuts.
6. Secure the auger half to the auger shaft using the
long cap screw and nylon lock nut.
4. Fasten the skid support bracket to the auger 7. Adjust the scraper and skids as described under
housing and
loosely install the skid.
Skids Installation and Scraper Installation,
pages
78 and 79.
70