Service Manual

ENGINE

5-6 Floating Deck Mid-Size Service Manual

25. Using a spring removal tool (Toro P/N 92-5771),

unhook the hydro drive idler spring and remove it

from the chassis (Fig. 0807).

Fig 0807 PICT-0300

26. Remove the hydro drive belt from around the engine

crankshaft pulley (Fig. 0808).

24. Remove the bolt, 2 spring washers and ﬂ at washer

securing the clutch to the engine crankshaft. Lower

the clutch off the engine crankshaft (Fig. 0806).

Fig 0808 PICT-0302a

Fig 0806 PICT-0299

27. Slide the drive pulley off the engine crankshaft (Fig.

0809).

Fig 0809 PICT-0303