Service Manual

MAINTENANCE
7 - 6 Single Stage Snowthrower Service Manual
VANE REPLACEMENT
Removal
1. Remove all mounting screws retaining the upper
shroud to the snowthrower. Remove the shroud.
2. To remove the vane from the vane mount, grasp
the vane near the vane mount and turn it 90°
either to the left or right and gently remove the
vane (Figure 174).
Figure 174 0217-081
3. Next, to remove the vane from the snowthrower,
using a screwdriver, gently tuck the vane in the
small slot in the shrouding. At the same time,
apply a slight downward pressure on the vane
(Figure 175).
Figure 175 0217-082