Service Manual

Single Stage Snowthrower Service Manual 6 - 3

ELECTRIC START SYSTEM

3. Remove the two bolts holding the upper shroud to

the front housing (Figure 137).

Figure 137 1352-03

4. Remove the two screws holding the dash in

position (Figure 138).

Figure 138 1854-42

5. Remove the gas cap and cover the fuel tank

opening with a clean plastic bag and rubber band

to prevent debris from entering.

6. Remove the three bolts to the starter switch box

(Figure 139).

Figure 139 1854-11

7. Lift the upper shroud up and remove the wires to

the key switch (Figure 140).

Figure 140 1854-06

8. Disconnect the primer hose to the primer bulb

(Figure 140).

9. Disconnect the spark plug wire from the spark

plug to prevent accidental starting.

(A) Screws

(A) Key Switch Wires (B) Primer Hose