Operator's Manual

4 MPH 5 MPH
3 MPH 4 MPH 5 MPH
30 VC 0.13 17 9.7 7.7 0.29 0.22 0.18
40 VC 0.15 19 11.1 8.9 0.34 0.26 0.20
50 VC 0.17 22 12.6 10.1 0.39 0.29 0.23
60 C 0.18 23 13.4 10.7 0.41 0.31 0.24
30 VC 0.17 22 12.6 10.1 0.39 0.29 0.23
40 VC 0.20 26 14.9 11.9 0.45 0.34 0.27
50 VC 0.22 28 16.3 13.1 0.50 0.37 0.30
60 VC 0.24 31 17.8 14.3 0.54 0.41 0.33
30 VC 0.22 28 16.3 13.1 0.50 0.37 0.30
40 VC 0.25 32 18.6 14.9 0.57 0.43 0.34
50 VC 0.28 36 21 16.6 0.63 0.48 0.38
60 VC 0.31 40 23 18.4 0.70 0.53 0.42
30 XC 0.26 33 19.3 15.4 0.59 0.44 0.35
40 VC 0.30 38 22 17.8 0.68 0.51 0.41
50 VC 0.34 44 25 20 0.77 0.58 0.46
30 XC 0.35 45 26 21 0.79 0.60 0.48
40 XC 0.40 51 30 24 0.91 0.68 0.54
50 VC 0.45 58 33 27 1.00 0.77 0.61
30 XC 0.43 55 32 26 0.97 0.73 0.58
40 XC 0.50 64 37 30 1.10 0.85 0.68
50 VC 0.56 72 42 33 1.30 0.95 0.76
30 XC 0.52 67 39 31 1.20 0.88 0.71
40 XC 0.60 77 45 36 1.40 1.00 0.82
50 VC 0.67 86 50 40 1.50 1.10 0.91
4 MPH 5 MPH
3 MPH 4 MPH 5 MPH
15 VC 0.61 78 45 36 1.40 1.00 0.83
20 VC 0.71 91 53 42 1.60 1.20 0.97
30 C 0.87 111 65 52 2.00 1.50 1.20
40 C 1.00 128 74 59 2.30 1.70 1.40
15 XC 0.92 118 68 55 2.10 1.60 1.30
20 XC 1.06 136 79 63 2.40 1.80 1.40
30 VC 1.30 166 97 77 2.90 2.20 1.80
40 C 1.50 192 111 89 3.40 2.60 2.00
*NOTE: Always double check your application rates.
Tabulations are based on spraying water at 70˚ F (21˚ C) Coarse Very Coarse Extremely Coarse
HIGH VOLUME SPRAY CHART (XRC TIPS)
Drop
Size
CAPACITY
ONE NOZZLE
IN GPM
CAPACITY
ONE NOZZLE
IN OZ./MIN
__HIGH VOLUME SPRAYING (SPACING)__
/\ 20" /\
GPA
GALLONS PER 1,000 SQ. FT.
PSI
Drop
Size
CAPACITY
ONE
NOZZLE
IN GPM
CAPACITY
ONE
NOZZLE
IN
OZ./MIN
_______ SPACING________
/\ 20" /\
GPA
GALLONS PER 1,000 SQ. FT.
*Grey tips are to be used ONLY the 4 tip booms*
PSI
At 15 PSI (1 bar)
Pressure
At 60 PSI (4 bar)
Pressure
1 4.75
2 5.5
3 6.0
2 4.75
4 5.5
6 6.5
2 5
4 6.25
6 7.25
2) Begin to spread the product. As you are spreading you should be able to see the spread pattern in front of you.
Generally, all spreaders will tend to throw fertilizer heavy to the right. As you continue to spread, pull the Accuway
control towards you very slowly (small increments) until you begin to bring the spread pattern directly centered
in front of you.
3) Once you have the spread pattern centered, lock the Accuway cable in place. There should be no reason to reset
the Accuway for that product unless you see that the spread pattern has changed due to bumping the lever. If it has
changed slightly, simply re-adjust the pattern while you're spreading.
Accuway
Accuway balances the spread pattern, by shifting the product placement on the spinner. Placing the product on the
impeller close to the shaft or the center will cause the spread pattern to be heavier to the right as it rides the impeller
for a longer period. If the product is placed on the outer edge of the impeller, the spread pattern will be heavier to the
left (because the spinner is turning clockwise).
1) Start with the Accuway control cable all the way forward or in (this is home base).
Spreader / Sprayer Calibration:
Mixing of liquid or dry product should be in accordance to manufacturers labels. Remember this is designed
for low volume spraying so the mix will be more concentrated.
Remember that your machine is factory set to put down 1/3 gallon of liquid per 1,000 sq. ft ( at 5MPH and
40PSI). For instance, some products call for 1.1 to 1.5 oz per 1,000 sq. ft. We would recommend using 1.3
(median value of 1.1 to 1.5). Since you are using a 1/3 gallon tip, you need to multiply by 3, then multiply that
amount by the number of gallons your put in your tank
1.3 (median value of 1.1 to 1.5) X 3 (1.3 gallon tip) X gallons of water needed. If you were filling a 30 gallon tank
your equation would look like this: 1.3 X 3 X 30 = 117 ounces in 30 gallons of water.
Approximate Granular Calibration
Throw fertilizer back to the center of tire tracks
5.0
6.0
6.5
Small Pellets
2
4
6
4.25
5.5
5.75
Product
Lbs. per
1,000 sq ft
Full Rate
Fine Pellets
1
2
3
4.75
5.25
5.5
Nitrogen Pellets Med.
Med. Pellets & Granules
Large Heavy Pellets
Mixed Fine Pellets
2
4
6
*Calibrated at 5 MPH
Fine
Mixed Fine
Small
Small/Med
Medium
Heavy
142-3313
decal142-3313
142-3313
10