Operator's Manual

g296783
Figure7
1.Jamnuts
3.Height-of-cutchain
2.U-bolt
7.Adjustthenuts(Figure7)toraiseorlowerthe
rearofthecuttingunitsothatthetipsoftherear
bladesare6to10mm(1/4to3/8inch)higher
thanthefronttips.
8.Tightenthejamnuts.
6
GreasingtheCuttingUnit
NoPartsRequired
Procedure
Beforeoperatingthecuttingunit,itmustbegreased
toensureproperlubricatingcharacteristics;refer
toGreasingtheBearingsandBushings(page16).
Failuretoproperlygreasethemachinewillresultin
prematurefailureofcriticalparts.
ProductOverview
Specications
Note:Specicationsanddesignaresubjectto
changewithoutnotice.
Widthof
Cut
•ModelNo.31974:1.52m(60inches)
•ModelNo.31975:1.82m(72inches)
Heightof
Cut
Adjustablefrom25to152mm(1to6inches)in13
mm(1/2inch)increments
Net
Weight
•ModelNo.31974:195kg(430lb)
•ModelNo.31975:222kg(490lb)
Attachments/Accessories
AselectionofT oroapprovedattachmentsand
accessoriesisavailableforusewiththemachine
toenhanceandexpanditscapabilities.Contact
yourAuthorizedServiceDealerorauthorizedToro
distributororgotowww.T oro.comforalistofall
approvedattachmentsandaccessories.
Toensureoptimumperformanceandcontinuedsafety
certicationofthemachine,useonlygenuineT oro
replacementpartsandaccessories.Replacement
partsandaccessoriesmadebyothermanufacturers
couldbedangerous,andsuchusecouldvoidthe
productwarranty.
10