Operator's Manual

10
ConnectingtheBattery
Model31902Only
NoPartsRequired
Procedure
Connectthebattery;refertoConnectingtheBattery
(page54).
11
InstallingtheAttachment
Partsneededforthisprocedure:
1
Optionalattachment(orderedseparately;refertoyour
authorizedT orodistributor)
2
Socket-headscrew(3/8inch)
2
Washer(3/8inch)
2
Flangelocknut(3/8inch)
Procedure
Important:Whenswitchingattachments,
conrmwithyourauthorizedTorodistributorthe
correctnumberofrearweightsforthatspecic
attachment.
Installthefrontattachment(e.g.,cuttingunit,ail,
plowblade,orblower);performthefollowingsteps
andrefertoyourattachmentOperator’sManualfor
additionalinstallationinstructions.
1.Whilesupportingthedriveshaft,removethe
capscrewandlocknutthatsecurethedriveshaft
yoketothesteeringvalve-mountbracket(Figure
15),andcarefullylowerthedriveshaft.
Note:Discardthecapscrewandlocknut.
g340623
Figure15
1.Capscrew
4.Locknut
2.Driveshaftyoke5.Frontofthemachine
3.Steeringvalve-mount
bracket
2.EnsurethatthePTOshaftisaligned;referto
AligningthePTODriveshaft(page57).
3.Haveanassistantsitintheseat,turnthekey
totheONposition,andusetheattachmentlift
switchtolowertheliftarmswhileyoupushdown
ontheliftarms.
4.Aligntheholesintheliftarmwiththeholesinthe
attachmentarmasdescribedintheattachment
InstallationInstructions.
5.Alignthesplinesinthedriveshaftyokeontothe
splinesoftheattachmentinputshaft(Figure16),
andslidetheyokeovertheshaft.
g340624
Figure16
1.Driveshaftyoke2.Inputshaft
6.Assembleasocket-headcapscrew(3/8x2-1/4
inches)throughawasher(3/8inch)andthehole
inthedriveshaftyoke(Figure17),andsecure
thecapscrewwithaange-locknut(3/8inch).
17