Operator's Manual

g031319
Figure135
1.Hydrauliclters
2.Drainplug
5.Installthedrainplugwhenthehydraulicuid
stopsdraining.
6.Cleantheareaaroundthelter-mountingareas.
7.Placeadrainpanunderthelterandremove
thelter(Figure135).
8.Lubricatethenewltergasketandllthelter
withhydraulicuid.
9.Ensurethatthelter-mountingareaiscleanand
screwtheltersonuntilthegasketscontacts
themountingplates;thentightenthelteran
additional1/2turn.
10.Fillthereservoirwithhydraulicuid;referto
CheckingtheHydraulicFluid(page86).
Important:Useonlythehydraulicuids
specied.Otheruidscouldcausesystem
damage.
11.Installthereservoirdipstickandcap.
12.Starttheengineanduseallofthehydraulic
controlstodistributehydraulicuidthroughout
thesystem.
Note:Also,checkforleaks,thenstopthe
engine.
13.Checktheuidlevelandaddenoughtoraise
theleveltotheFullmarkonthedipstick.
Note:Donotoverll.
CheckingtheHydraulic
LinesandHoses
ServiceInterval:Every2years—Replacemoving
hydrauliclinesandhoses.
Inspectthehydrauliclinesandhosesdailyfor
leaks,kinkedlines,loosemountingsupports,wear,
loosettings,weatherdeterioration,andchemical
deterioration.Makeallnecessaryrepairsbefore
operatingthemachine.
InspectingtheHydraulic
SystemTestPorts
Thetestportsareusedtotestthepressureinthe
hydrauliccircuits.ContactyourlocalT orodistributor
orrefertotheToroServiceManualforassistance.
88