Operator's Manual
Figure8
1.Eccentricnotch
•Tightentheboltandnutforthiseccentricto110ft-lb
(149N-m).
•Adjusttheforwardeccentricuntilitjustmakescontact
withtheinnerslotsurfaceofthewingletpivotbrackets.
•Tightentheboltandnutforthiseccentricto110ft-lb
(149N-m).
•Repeattheprocedureontheoppositewinglet.Referto
AdjustingtheCuttingUnitPitchprocedureinMower
Maintenance.
5
CheckingTirePressure
NoPartsRequired
Procedure
Checktheairpressureinallthetiresbeforeoperatingthe
machine.Thecorrectairpressureinthefronttiresis50psi
(345kPa)andthereartiresis30psi(207kPa)(
Figure9).
Important:Maintainpressureinalltirestoensurea
goodquality-of-cutandpropermachineperformance.
Do not under -inate.
Figure9
6
CheckingFluidLevels
NoPartsRequired
Procedure
1.Checktheengineoillevelbeforestartingtheengine,
refertoCheckingtheEngineOilLevelinEngine
Maintenance.
2.Checkthehydraulicuidlevelbeforestartingthe
engine,refertoCheckingtheHydraulicFluidLevelin
HydraulicSystemMaintenance.
3.Checkthecoolingsystembeforestartingtheengine;
refertoCheckingtheCoolingSysteminCooling
SystemMaintenance.
7
GreasingMachine
NoPartsRequired
Procedure
Beforethemachineisoperated,itmustbegreasedto
ensureproperlubricatingcharacteristics;refertoGreasing
theBearingsandBushingsprocedureinLubricationinthe
MaintenanceSection.Failuretoproperlygreasethemachine
willresultinprematurefailureofcriticalparts.
17