Service Manual

Rev. A

Groundsmaster 360 Page 6 − 3 Chassis

Special Tools

Order special tools from your Toro Distributor.

Wheel Hub Puller

The wheel hub puller allows safe removal of the wheel

hub from the wheel motor shaft.

Toro Part Number: TOR6004

Figure 1

Steering Alignment Tools

The steering alignment tools are used to ensure that the

front and rear steering assemblies are properly cen-

tered for steering assembly service. These tools are re-

quired for adjustment of wheel alignment or when

replacing tie rods. The steering alignment tool kit in-

cludes the two (2) tools necessary for use on a machine.

One of the tools centers the front steering assembly and

one centers the rear. The tool kit also includes neces-

sary hardware for attaching the tools to the machine.

Toro Part Number: TOR6019

The front alignment tool (TOR6019−1) requires the fol-

lowing hardware for attachment purposes:

1/2” − 13 x 1” cap screw (qty. 2) (Toro part #325−4)

1/2” − 13 x 2” cap screw (qty. 1) (Toro part #325−8)

1/2” nut (qty. 3) (Toro part #3217−9)

The rear alignment tool (TOR6019−2) requires the fol-

lowing hardware for attachment purposes:

3/8” − 16 x 1.25” cap screw (qty. 1) (Toro part #323−7)

3/8” nut (qty. 1) (Toro part #3217−7)

1/2” − 13 x 2” cap screw (qty. 1) (Toro part #325−8)

1/2” nut (qty. 1) (Toro part #3217−9)

1. Front alignment tool 2. Rear alignment tool

Figure 2

Chassis