Operator's Manual

6.Throughtheopenhole,slowlylltheplanetary
with0.65L(22oz)ofhighqualitySAE85W-140
gearlube.
Important:Iftheplanetaryllsbeforethe
0.65L(22oz)ofoilisadded,wait1hour
orinstalltheplugandmovethemachine
approximately3m(10ft)todistributetheoil
throughthebrakesystem.Then,removethe
plugandaddtheremainingoil.
7.Installtheplug.
8.Repeattheprocedureontheopposite
planetary/brakeassembly.
CheckingtheRearAxle
Lubricant
ServiceInterval:Every400hours
Therearaxleisshippedfromthefactorylledwith
SAE85W-140gearlube.Thecapacityis2.4L(80
oz).Visuallyinspectforleaksdaily.
1.Positionthemachineonalevelsurface.
2.Removeacheckplugfrom1endoftheaxle
(Figure74)andmakesurethatthelubricantis
uptothebottomofthehole.
3.Ifthelevelislow,removethellplug(Figure
74)andaddenoughlubricanttobringthelevel
uptothebottomofthecheckplugholes.
g009716
Figure74
1.Checkplug
2.Fillplug
ChangingtheRearAxle
Lubricant
ServiceInterval:Aftertherst200hours
Every800hours
1.Positionthemachineonalevelsurface.
2.Cleantheareaaroundthe3drainplugs,1on
eachendand1inthecenter(Figure75).
g009717
Figure75
1.Drain-pluglocation
3.Removethe3oil-levelcheckplugsandmain
axleventcaptoeaseindrainingoftheoil.
4.Removethedrainplugsandallowtheoiltodrain
intothepans.
5.Installtheplugs.
6.Removeacheckplugandllaxlewith
approximately2.4L(80oz)of85W-140gear
lubeoruntillubricantreachesthebottomofthe
hole.
7.Installthecheckplug.
CheckingtheRearWheel
Toe-In
ServiceInterval:Every800hours/Yearly(whichever
comesrst)
1.Measurethecenter-to-centerdistance(ataxle
height)atthefrontandrearofthesteeringtires.
Thefrontmeasurementmustbe3mm(1/8inch)
lessthantherearmeasurement(Figure76).
g009169
Figure76
1.Frontoftractionunit3.Centertocenterdistance
2.1/8inchlessthanrearof
tire
2.Toadjust,removethecotterpinandnutfrom
eithertie-rodballjoint(Figure77)andremove
thetie-rodballjointfromtheaxle-casesupport.
60