Operator's Manual

g036687
Figure90
1.Fitting(fuel-pickuptube)
4.Rubberbushing
2.Hoseclamp
5.Screen
3.Fuelsupplyhose
2.Separatethehosefromthetting(Figure90).
3.Liftthefuel-pickuptubefromthefueltank
(Figure90).
Note:Liftthetubestraightfromthebushingin
thetank.
4.Cleananydebrisfromthescreenattheendof
thefuel-pickuptube(Figure90).
5.Insertthefuel-pickuptubethroughtherubber
bushingandintothetank(Figure90).
Note:Ensurethatthefuel-pickuptubeisfully
seatedintotherubberbushing.
6.Installthesupplyhoseontothettingofthe
fuel-pickuptube,andsecurethehosewiththe
hoseclampthatyouremovedinstep1.
PrimingtheFuelSystem
Primethefuelsystembeforestartingtheenginefor
thersttime,afterrunningoutoffuel,orafterfuel
systemmaintenance(e.g.,drainingthelter/water
separator,replacingafuelhose).
Toprimethefuelsystem,performthefollowingsteps:
1.Ensurethatfuelisinthefueltank.
2.TurntheignitionkeytotheONpositionfor10
to15seconds.
Note:Thisallowsthefuelpumptoprimethe
fuelsystem.
Important:Donotusetheenginestartermotorto
cranktheenginetoprimethefuelsystem.
ElectricalSystem
Maintenance
ElectricalSystemSafety
•Disconnectthebatterybeforerepairingthe
machine.Disconnectthenegativeterminalrst
andthepositivelast.Connectthepositiveterminal
rstandthenegativelast.
•Chargethebatteryinanopen,well-ventilated
area,awayfromsparksandames.Unplugthe
chargerbeforeconnectingordisconnectingthe
battery.Wearprotectiveclothinganduseinsulated
tools.
CheckingtheBattery
Condition
ServiceInterval:Every50hours
Important:Beforeweldingonthemachine,
disconnectthenegativecablefromthebatteryto
preventdamagetotheelectricalsystem.Also,
youmustdisconnecttheengine,InfoCenter,
andmachinecontrollersbeforeweldingonthe
machine.
Note:Keeptheterminalsandtheentirebatterycase
clean,becauseadirtybatterydischargesslowly.T o
cleanthebattery,washtheentirecasewithasolution
ofbakingsodaandwater.Rinsewithclearwater.
Coatthebatterypostsandcableconnectorswith
Grafo112X(skin-over)grease(T oroPartNo.505-47)
orpetroleumjellytopreventcorrosion.
62