Operator's Manual

Throttle Control
Mo v e the control ( K uv a 7 ) forw ard to increase the
engine speed and rearw ard to decrease the speed.
Kuva 7
1. Throttle control 5. PTO switch
2. Lift lever 6. Hi -Lo speed control
3. Hour meter
7. Power point
4. Engine temperature gauge
Lift Lever
T he lev er ( K uv a 7 ) raises and lo w ers the cutting
units .
Hour Meter
T he hour meter ( K uv a 7 ) sho ws the total hours
that the mac hine has been operated.
Engine Temperature Gauge
T his g aug e ( K uv a 7 ) indicates the engine coolant
temperature .
PTO Switch
T he PTO switc h ( K uv a 7 ) has tw o positions: On
(eng ag e) and Off (diseng ag e). Push the PTO
switc h forw ard to the On position to star t the
implement or cutting unit blades . Push the switc h
bac kw ard to the Off position to stop implement
operation.
Hi -Lo Speed Control
T he switc h ( K uv a 7 ) allo ws the speed rang e to
increase for transpor t of the mac hine . Cutting
dec ks will not operate in high rang e .
Power Point
T he po w er point ( K uv a 7 ) is used to po w er
optional 12 v olt electrical accessories .
Fuel Gauge
T he fuel g aug e ( K uv a 8 ) indicates the lev el of fuel
in the tank.
Kuva 8
1. Fuel gauge
Cutting Unit Lift Latch (CE)
T he cutting unit lift latc h ( K uv a 9 ) loc ks the center
fiv e cutting unit lift lev ers when the cutting units
are in the raised position.
Kuva 9
1. Cutting unit lift latch
18