Operator's Manual

Maintenance

Service Interval

Maintenance Procedure

Before storage

• Drain and clean the fuel tank.

• Check the tire pressure.

• Check all fasteners.

• Grease or oil all grease ttings and pivot points.

• Paint chipped surfaces.

Yearly

• Check the fuel lines and connections.

• Replace the fuel pre-lter.

• Change the planetary gear drive oil.

• Check the rear wheel toe-in.

Every 2 years

• Replace the interlock switches.

Important: R efer to y our engine Operator’ s Man ual and cutting unit Operator’ s Man ual f or additional

maintenance pr ocedur es.