Installation Instructions

Jodale • Perry
VEHICLE PREPARATION
1. Position the machine on a
level surface. Set the parking
brake, lower the cutting units,
turn the ignition off and
remove the key.
2. Remove the plastic storage
container (box), LH.
3. Remove the battery and the
fasteners from the RH box
and move the box aside. (to
the center of machine)
4. Remove the 2-Post ROPS,
2-Post ROPS bracket and the
bottom plate. (keep all bolts
for re-installation)
5. Move seat full forward and tilt
the seat back full forward.
6. Remove plastic front cover
and lights.
7. Install alternator and A/C
compressor kit, Model 30862
per instructions.
8. Install rear wheel weight kit,
104-1478, per instructions.
12